Discussion Forum - Northstar Chevelle Club

Members Login
Username 
 
Password 
    Remember Me  
NCC Forum Home Page -> NCC - Classifieds -> 1993 Gen V 454 long block SOLD
Post Info TOPIC: 1993 Gen V 454 long block SOLD
Lost in the 60s


President

Status: Offline
Posts: 7355
Date:
1993 Gen V 454 long block SOLD
Permalink  
 

I'm selling the 454 that's been in my '66. I've driven this for 3 years and have had no issues with it.

It's a 1993 Gen V 454 from a truck/Suburban. It does have an unknown aftermarket cam that sounds good and performs well, but the peanut port heads limit upper rpm performance. I do have a pair of big valve heads for it that will be included along with ARP rocker studs for adjustable rockers. It will come with the original cast valve covers, but no intake/carb or any bolt on external accessories. Those will go back on the replacement engine. It will include the Gen V specific flywheel. I don't have a flex plate.

It has a GM performance conversion oil pan to allow it to fit in most other Chevrolet body styles besides the A body.

It will stay in the car for a couple weeks and can be heard running and maybe driving. Depends on weather, since the car has no rear glass.

I'd like to get $350 for all this. The oil pan alone cost $160 and I think I have about $120 in the extra heads and studs...clonk

 



-- Edited by Lost in the 60s on Sunday 22nd of November 2015 09:05:01 PM



-- Edited by Lost in the 60s on Sunday 6th of December 2015 12:55:52 PM

__________________

Mitch D.   River Falls, WI

Lifetime member of the "Cars apart Club"

Some Assembly Required

1966 Chevelle SS 396 M20

1970 Chevelle SS 396 M20

1967 Camaro SS/RS 350 M20
Enganeer


Mega Poster

Status: Offline
Posts: 715
Date:
RE: For Sale 1993 Gen V 454 long block
Permalink  
 

hmmm... 350 for a big block...oh the temptation demons are screaming at

__________________

John E - Rogers, MN

Instructions? All I need is the exploded view.
70 El Camino soon to be ls1/t56
64 Malibu SS
Lost in the 60s


President

Status: Offline
Posts: 7355
Date:
Permalink  
 

I forgot to mention it IS a 4 bolt main, 1 piece rear seal block.



__________________

Mitch D.   River Falls, WI

Lifetime member of the "Cars apart Club"

Some Assembly Required

1966 Chevelle SS 396 M20

1970 Chevelle SS 396 M20

1967 Camaro SS/RS 350 M20
Lost in the 60s


President

Status: Offline
Posts: 7355
Date:
Permalink  
 

Enganeer wrote:

hmmm... 350 for a big block...oh the temptation demons are screaming at

 Since I owe you $200 for the wheels, that would only be a buck and half out of your pocket....stirpot



__________________

Mitch D.   River Falls, WI

Lifetime member of the "Cars apart Club"

Some Assembly Required

1966 Chevelle SS 396 M20

1970 Chevelle SS 396 M20

1967 Camaro SS/RS 350 M20
Enganeer


Mega Poster

Status: Offline
Posts: 715
Date:
Permalink  
 

roller cam inside?

__________________

John E - Rogers, MN

Instructions? All I need is the exploded view.
70 El Camino soon to be ls1/t56
64 Malibu SS
Enganeer


Mega Poster

Status: Offline
Posts: 715
Date:
Permalink  
 

As much of a bargain as it is, I have to pass...I already have three extra engines and little room for another.

__________________

John E - Rogers, MN

Instructions? All I need is the exploded view.
70 El Camino soon to be ls1/t56
64 Malibu SS
OscarZ


Treasurer

Status: Offline
Posts: 837
Date:
Permalink  
 

Chris R should buy it to throw in his 66 until he can go through his current motor. :)

__________________

Michael S. - Cambridge
'71 Malibu
Lost in the 60s


President

Status: Offline
Posts: 7355
Date:
Permalink  
 

Not a roller block, not a roller cam.



__________________

Mitch D.   River Falls, WI

Lifetime member of the "Cars apart Club"

Some Assembly Required

1966 Chevelle SS 396 M20

1970 Chevelle SS 396 M20

1967 Camaro SS/RS 350 M20
Chris R


2K+ Club

Status: Offline
Posts: 2766
Date:
Permalink  
 

OscarZ wrote:

Chris R should buy it to throw in his 66 until he can go through his current motor. :)

 Its been on my mind all day today actually.



__________________

Chris - Ramsey, MN.

Dear Optimist, Pessimist, and Realist.

While you guys were busy arguing about the glass of water. I drank it!

Sincerly,

The opportunist.
Derek69SS


Founding Member

Status: Offline
Posts: 2801
Date:
Permalink  
 

Someone buy it so I don't. cuckoo



__________________

Derek Kiefer - Mantorville, MN

69 Malibu Pro-Touring stroker LS1-383/T56 - 69 SS396-325/3spd project
Lost in the 60s


President

Status: Offline
Posts: 7355
Date:
Permalink  
 

Chris R wrote:
OscarZ wrote:

Chris R should buy it to throw in his 66 until he can go through his current motor. :)

 Its been on my mind all day today actually.

 Is your car a manual trans ?



__________________

Mitch D.   River Falls, WI

Lifetime member of the "Cars apart Club"

Some Assembly Required

1966 Chevelle SS 396 M20

1970 Chevelle SS 396 M20

1967 Camaro SS/RS 350 M20
Chris R


2K+ Club

Status: Offline
Posts: 2766
Date:
Permalink  
 

Yes. M21 Muncie.



__________________

Chris - Ramsey, MN.

Dear Optimist, Pessimist, and Realist.

While you guys were busy arguing about the glass of water. I drank it!

Sincerly,

The opportunist.
67ss


1K+ Club

Status: Offline
Posts: 1732
Date:
Permalink  
 

Sounds like a perfect weekend tech session to get it running again.

stirpot



__________________

Chris P
East Central, Mn

66 Chevelle 300 deluxe
Lost in the 60s


President

Status: Offline
Posts: 7355
Date:
Permalink  
 

OK, I'll sweeten the deal a little.

I remembered that the pressure plate is particular to the 1 piece flywheel, and will include that. It does chatter a little when first engaging, but with practice it can be done smoothly.

This block also requires an electric fuel pump and clutch cross shaft adapter bracket. I was going to keep them in case I "came across" a Gen VI block someday...stirpot

 The bracket alone was almost $100 to my door from Scoggin-Dickey. For an extra $50, I'll include them and make it a truly bolt in swap. All you would need is the intake and exhaust gaskets.



__________________

Mitch D.   River Falls, WI

Lifetime member of the "Cars apart Club"

Some Assembly Required

1966 Chevelle SS 396 M20

1970 Chevelle SS 396 M20

1967 Camaro SS/RS 350 M20
OscarZ


Treasurer

Status: Offline
Posts: 837
Date:
Permalink  
 

I can attest to getting a car back on the road via a successful tech session. Treat yourself to an early Christmas present!

__________________

Michael S. - Cambridge
'71 Malibu
Lost in the 60s


President

Status: Offline
Posts: 7355
Date:
Permalink  
 

67ss wrote:

Sounds like a perfect weekend tech session to get it running again.

stirpot

 December 5th dunno



__________________

Mitch D.   River Falls, WI

Lifetime member of the "Cars apart Club"

Some Assembly Required

1966 Chevelle SS 396 M20

1970 Chevelle SS 396 M20

1967 Camaro SS/RS 350 M20
Chris R


2K+ Club

Status: Offline
Posts: 2766
Date:
Permalink  
 

Mitch. PM Sent.



__________________

Chris - Ramsey, MN.

Dear Optimist, Pessimist, and Realist.

While you guys were busy arguing about the glass of water. I drank it!

Sincerly,

The opportunist.
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
NCC Forum Home Page -> NCC - Classifieds -> 1993 Gen V 454 long block SOLD
Chatbox
Please log in to join the chat!