Discussion Forum - Northstar Chevelle Club

Members Login
Username 
 
Password 
    Remember Me  
NCC Forum Home Page -> NCC - Classifieds -> Currie bolt-in 9-inch rear axle, Hotchkis front spindles
Post Info TOPIC: Currie bolt-in 9-inch rear axle, Hotchkis front spindles
Scott Parkhurst


Super Poster

Status: Offline
Posts: 680
Date:
Currie bolt-in 9-inch rear axle, Hotchkis front spindles
Permalink  
 

Hey all...I still have a new Currie bolt-in 9-inch for sale. I got it for a past project that I sold off,so it's never been used. It's 3 inches narrower than stock and was ordered for a '65, but will fit under 64-72 cars without major mods. Has the flat spring pads for '65-'67. Full of all the good 9-plus stuff..31 spline high strength axles, Torino bearings, Chevy bolt pattern. I have a center section in it now- nodular unit with Detroit Locker and 4.30:1 Currie gears. All built by Currie and new as delivered. Housing, axles and Baer drilled discs (no calipers or brackets, just discs) $1,000...complete unit with center section $2,000. Center section alone $1,250. 

Also have a pair of Hotchkis Impala spindles available. New, never used. $250/pr. 

 

Call me at home 952 873 6670 or e-mail at Wrdsmth495@Yahoo

Scott



__________________

Scott Parkhurst

Belle Plaine

 

Horsepower Junkie
John D


2K+ Club

Status: Offline
Posts: 2811
Date:
Permalink  
 

Must Resist... think A/C... Must Resist...

(Why do you taunt me this way Scott?)

__________________

 

John D. - St. Louis Park, MN.

1965 El Camino - LT-1, 4L60e, 4wh discs, SC&C susp.
2013 F-150 Platinum - Twin Turbo 3.5

2018 Factory Five MkIV Roadster build thread
Scott Parkhurst


Super Poster

Status: Offline
Posts: 680
Date:
Permalink  
 

I can't help it. I'm an instigator. An enabler. A trouble maker. I thought all of you knew this about me by now? Don't go out drinking with me. That's all I'm saying...



__________________

Scott Parkhurst

Belle Plaine

 

Horsepower Junkie
Lost in the 60s


President

Status: Offline
Posts: 7355
Date:
Permalink  
 

If it was a leaf spring axle, I would have a buyer for it...doh



__________________

Mitch D.   River Falls, WI

Lifetime member of the "Cars apart Club"

Some Assembly Required

1966 Chevelle SS 396 M20

1970 Chevelle SS 396 M20

1967 Camaro SS/RS 350 M20
Scott Parkhurst


Super Poster

Status: Offline
Posts: 680
Date:
Permalink  
 

Okay- it looks like the center section will be sold separately...so, the 9-inch housing and axles will be available without a third member for $1,000. I will include drilled Baer discs. All new stuff!

__________________

Scott Parkhurst

Belle Plaine

 

Horsepower Junkie
Derek69SS


Founding Member

Status: Offline
Posts: 2801
Date:
Permalink  
 

That's a great price!

__________________

Derek Kiefer - Mantorville, MN

69 Malibu Pro-Touring stroker LS1-383/T56 - 69 SS396-325/3spd project
Scott Parkhurst


Super Poster

Status: Offline
Posts: 680
Date:
Permalink  
 

Ya- this is what it is:
currieenterprises2.reachlocal.net/cestore/productsCR.aspx



__________________

Scott Parkhurst

Belle Plaine

 

Horsepower Junkie
Scott Parkhurst


Super Poster

Status: Offline
Posts: 680
Date:
Permalink  
 

Will take $850 on this housing now! I'd like the space it occupies...

__________________

Scott Parkhurst

Belle Plaine

 

Horsepower Junkie
Lost in the 60s


President

Status: Offline
Posts: 7355
Date:
Permalink  
 

Scott Parkhurst wrote:

Will take $850 on this housing now! I'd like the space it occupies...

 Just gotta keep poking at us, don't ya...

Any use for a '71 12 bolt with 4.56 posi as partial trade dunno



__________________

Mitch D.   River Falls, WI

Lifetime member of the "Cars apart Club"

Some Assembly Required

1966 Chevelle SS 396 M20

1970 Chevelle SS 396 M20

1967 Camaro SS/RS 350 M20
Scott Parkhurst


Super Poster

Status: Offline
Posts: 680
Date:
Permalink  
 

Sorry Mitch!

I've got all the rear axles I need...in fact, one too many!

These things are heavy and take up a lot of room too.

I bet someone in this club would like that 12-bolt with 4.56s though..!

__________________

Scott Parkhurst

Belle Plaine

 

Horsepower Junkie
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
NCC Forum Home Page -> NCC - Classifieds -> Currie bolt-in 9-inch rear axle, Hotchkis front spindles
Chatbox
Please log in to join the chat!