Discussion Forum - Northstar Chevelle Club

Members Login
Username 
 
Password 
    Remember Me  
NCC Forum Home Page -> NCC - Projects and Updates -> Guess who found another build sheet.....
Post Info TOPIC: Guess who found another build sheet.....
bowtie


Secretary

Status: Offline
Posts: 2941
Date:
Guess who found another build sheet.....
Permalink  
 

Under the driver's seat, under the carpet, under the tarpaper. Upper right corner reads: 1H57H2R605253.

Gues mine's a Monte Carlibu. It's for a 72 Monte that was yelloow with a tan vinyl top. Intersting. It was 153 ahead mine on the line, which I think is odd to somehow get back into a car.

__________________

Bryan-NW 'burbs
1972 Malibu
Vaguely stock appearing, and the opposite of restored.
1999 std bore 5.7, Vortec heads, Holley Stealth Ram, GM cam
700R4, Viking coilovers, 12 bolt 4.10 posi, and a whole bunch more
Lost in the 60s


President

Status: Offline
Posts: 7328
Date:
Permalink  
 

It got dropped on the floor and by the end of the shift, the work area has to be clean, so the worker picked it up and threw it in your car.I worked at the Ford plant in St. Paul in '71/72 and once the trash cans were full all the crap went down the line in the cars...wink

__________________

Mitch D.   River Falls, WI

Lifetime member of the "Cars apart Club"

1966 Chevelle SS 396 M20

1970 Chevelle SS 396 M20

1967 Camaro SS/RS 350 M20
bowtie


Secretary

Status: Offline
Posts: 2941
Date:
Permalink  
 

nice.

__________________

Bryan-NW 'burbs
1972 Malibu
Vaguely stock appearing, and the opposite of restored.
1999 std bore 5.7, Vortec heads, Holley Stealth Ram, GM cam
700R4, Viking coilovers, 12 bolt 4.10 posi, and a whole bunch more
SShink


3K+ Club

Status: Offline
Posts: 4731
Date:
Permalink  
 

That was along the guess I was going to make.  Somebody forgot to put it in the Monte and didn't want to get caught holding it, so they just stuffed it in another car as they walked by.

Seems like some of us assume that manufacturing cars back then was as controlled a process as today.  I'm sure a few things like this happen today, but not nearly as much with all the QC and mfg. process controls. 

I've been in mfg. for over 25 years, and every factory I've been involved with (both U.S. and overseas) cuts corners here and there or don't always follow the work instructions to the T.  That's how we end up with head scratchers like this.  Usually due to acts of human randomness!  biggrin

__________________

Stan S.-Twin Cities 'South Metro'

1972 Malibu Convertible 2nd time around 

2001 Mustang GT Convertible 

Forum influenced terms: 'Link Paste', 'Stanitized', & 'Revolving garage door...' 

 
Lost in the 60s


President

Status: Offline
Posts: 7328
Date:
Permalink  
 

The line sheets (build sheets) were never intended to be left in the cars. I've always had the feeling that so many are found in seats because of the assembly process. The frames and foams were the same no matter the final cover color and it's possible that the frame and foam were set on a line with the sheet in view for the cover installer to see what they needed at a glance.

__________________

Mitch D.   River Falls, WI

Lifetime member of the "Cars apart Club"

1966 Chevelle SS 396 M20

1970 Chevelle SS 396 M20

1967 Camaro SS/RS 350 M20
bowtie


Secretary

Status: Offline
Posts: 2941
Date:
Permalink  
 

I understand the seat one a little. I found one in my original back seat that looked like a note pad sheet with the interior code on it, but what about the door panel, headliner, and gas tank ones? I agree that they probably weren't supposed to be coveted like they are (at least in more rare cars), but they are also put in places that are most likely to stay safe for years-well except the door panel.

I suppose the gas tank one is taped to the top of the tank as it's installed and goes down the line since the body is not there yet, it can still be seen?



__________________

Bryan-NW 'burbs
1972 Malibu
Vaguely stock appearing, and the opposite of restored.
1999 std bore 5.7, Vortec heads, Holley Stealth Ram, GM cam
700R4, Viking coilovers, 12 bolt 4.10 posi, and a whole bunch more
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
NCC Forum Home Page -> NCC - Projects and Updates -> Guess who found another build sheet.....
Chatbox
Please log in to join the chat!