Discussion Forum - Northstar Chevelle Club

steve m · steve m

Selling the fuel tank from my 1968, Tank is like new with sump welding on bottom and return port by side by sender if using return line, $100 cash, steve 651-216-0779

steve m · steve m

I have a outside a/c box from a 68 chevelle with evaporator and condensor and drier, some lines, would like to sell all of it together, make offer, also have ac compressor and brackets for sbc with short waterpump, looks all there, make offer, 651-216-0779

Enganeer · Enganeer

Was wondering if anyone has any 3/8" steel tubing laying around. I am fabbing a 3/8" return line in the fuel sender for my 64 and only have aluminum hard line. Only need a foot or two. Thanks, -- Edited by Enganeer on Friday 16th of November 2012 09:31:43 AM

dashboard · dashboard

Doing some more house cleaning, I have found. Two distributors one MSD or Accel and one GM both HEI One Center Force clutch with pressure plate only has 500 miles on it, came out of the Elky 20gal, A body fuel tank coming out of our 65 Buick. This tank will fit a lot of A body’s however there are some small dif...

steve m · steve m

Selling my worth 7000lb floor plate hoist, Getting a 9000lb, Works great, New hoses and seal kits in rams, Would like to get $1200 but would let it go for $1000, New one is going to be here in 5 weeks and that is when it would be available. 651-216-0779

John D · John D

Same guy I got my 1911 from... He's got two Glocks - a full size and a compact. I'll ask him tomorrow for details & $$$, but I said I'd ask around for interested parties. PM me if interested.

more ambition than brains · more ambition than brains

One owner, 49,900 miles. New battery, brake rotors and pads this month. We have serviced this vehicle since November of 2002. Very clean, driven very little the last couple of years. Always garage kept. Must see and drive to appreciate. We are selling for our customer/friend. Black in color, dark...

SShink · SShink

I'm selling the collector back system off the vert to replace with new. The collector to muffler pipes and H pipe are 2 1/2" pipe, and the tailpipes are 2 1/4" with chrome tips. Will fit '68-72 A body for sure. Not sure about other A body years. $50 for the whole works. [IMG]https://i167.ph...

Lost in the 60s · Lost in the 60s

Grant chrome spoke and cap, 13.5 " diameter, black foam. Good condition. I forgot to measure the dish. It's about 2-3 inches.

Lost in the 60s · Lost in the 60s

I am selling the front wheels/tires off the '38 They are 15X4.5 with Nexen 165x80x15 tires in very good condition.

jim larson · jim larson

Looking for a pair of brackets off a 10 bolt to replace the brackets on a 66 12 bolt. The holes for the control arm bushings were a little worn, so someone welded 4 thick washers for a repair. I am thinking of repaceing those brackets by have a good pair welded on axel tubes. I saw a good 10 bolt with good b...

Derek69SS · Derek69SS

$100/mo or $500/6mo paid in advance Anything longer than 16' will cost extra... (boats, trucks, big cars, etc) Have room for 3, maybe 4 cars. Must have own insurance. Derek Kiefer Mantorville MN (near Rochester) 507-438-8907

gearlube · gearlube

http://minneapolis.craigslist.org/dak/pts/3343501422.html

Lost in the 60s · Lost in the 60s

I can bring any of this to Derek's on Saturday. I changed the shifter hump on my '66 this past Spring and have the old carpet and hump for sale. This is the high quality ACC carpet from Auto City Classics. The front has a preformed hump to match the steel hump and is cut out for a floor shifter. There are slit...

4-door Chevelle · 4-door Chevelle

Everything has to go now so please let me know what you want. I am planning on going to the Anoka Car Show tomorrow. Rail Tranny cooler - new 2 - rear valance panel from my 72, 1 OK 1 not Fan shroud from my 72 Sweep dash from my 72, blue with some holes in it for switches and gauges Dash pad from my 72, single spe...

Chris R · Chris R

Jamie got in touch with me today and it looks like he will have plenty of winter storage this season. Right now he says around 7 or 8 vehicles. Depending on if any full sized trucks show up, he says he has a bunch of room available for winter storage this year and asked me to post his email address to get in to...

gearlube · gearlube

http://minneapolis.craigslist.org/dak/pts/3343447284.html

bowtie · bowtie

The skin has been cut pretty much from the body line down, but the inner structure is good. Cut off the cat high on the sail, cut mid-rocker, and cut into the trunk opening so you can grab any sections. Free to a good home. I'm not going to it for too long, grab it or it's scrap.

Scott Parkhurst · Scott Parkhurst

A pal of mine got these in trade and doesn't need them. They're all fresh, but came off a running engine so they'll get cleaned up before being sold. 500 takes everything.

steve m · steve m

Looking for a 68-72 4 bolt top plate for the radiator, thanks steve

bowtie · bowtie

I have 2 heaters I got from Menard's and used in my old house. They're part number CZQTV5M, google it for accurate specs. They work like radiant heat ones--no fan, just projecting the heat wave towards the area. Worked well enough for specific areas like over a work bench or a more focused area (15x15)....

dashboard · dashboard

I’m looking for a different front seat setup for the Buick, something more comfortable and adjustable for my old butt on long trips. I’d like something like a 60/40 or 50/50 possibly with a fold down armrest, I want the seat to have the built in integral shoulder harness that would work in the vert. I’ve...

dashboard · dashboard

Looking for a set of old rusted, bent, twisted ugly 14” rims, (width is not important I only need clearance for factory disc) that will fit a Chevelle/El Camino.

bowtie · bowtie

I need the trim on the rear of a cowl hood. Does not need to be perfect, just useable.

4-door Chevelle · 4-door Chevelle

In the process of cleaning out my shed I have run across a very interesting item. One of my previous 4-door Chevelles had chrome trim around the doors and over the pillar inbetween them, that is some serious! Of course I am now giving it away but I thought it was kind of cool!?!

4-door Chevelle · 4-door Chevelle

These things are basically new with a white side wall. Let me know if you need a picture. -- Edited by 4-door Chevelle on Sunday 30th of September 2012 07:59:25 AM

steve m · steve m

Looking for a nice set of factory hood hinges, no repo, Thanks steve

4-door Chevelle · 4-door Chevelle

Drivers side got ruined when caught on a cement apron.

4-door Chevelle · 4-door Chevelle

This is for the front of my Chevelle.

4-door Chevelle · 4-door Chevelle

I guess these were off an S10. I ran these for a few years and are a nice 15x8 wheel, 5x4 3/4 stud spacing. I am missing two of the beauty rings and I never had any center caps.

Topic		Started By	Replies	Views	Last Post
	68/69 fuel tank with sump (Preview) Selling the fuel tank from my 1968, Tank is like new with sump welding on bottom and return port by side by sender if using return line, $100 cash, steve 651-216-0779	steve m	1	367	Nov 19, 2012 by steve m
	ac stuff (Preview) I have a outside a/c box from a 68 chevelle with evaporator and condensor and drier, some lines, would like to sell all of it together, make offer, also have ac compressor and brackets for sbc with short waterpump, looks all there, make offer, 651-216-0779	steve m	0	304	Nov 19, 2012 by steve m
	Anyone have some 3/8 steel tubing fuel line laying around (Preview) Was wondering if anyone has any 3/8" steel tubing laying around. I am fabbing a 3/8" return line in the fuel sender for my 64 and only have aluminum hard line. Only need a foot or two. Thanks, -- Edited by Enganeer on Friday 16th of November 2012 09:31:43 AM	Enganeer	2	354	Nov 16, 2012 by John D
	Stuff (Preview) Doing some more house cleaning, I have found. Two distributors one MSD or Accel and one GM both HEI One Center Force clutch with pressure plate only has 500 miles on it, came out of the Elky 20gal, A body fuel tank coming out of our 65 Buick. This tank will fit a lot of A body’s however there are some small dif...	dashboard	4	456	Nov 16, 2012 by Lost in the 60s
	7000lb hoist (Preview) Selling my worth 7000lb floor plate hoist, Getting a 9000lb, Works great, New hoses and seal kits in rams, Would like to get $1200 but would let it go for $1000, New one is going to be here in 5 weeks and that is when it would be available. 651-216-0779	steve m	12	641	Nov 16, 2012 by MACK5555
	Friend getting out of .40 cal (Preview) Same guy I got my 1911 from... He's got two Glocks - a full size and a compact. I'll ask him tomorrow for details & $$$, but I said I'd ask around for interested parties. PM me if interested.	John D	0	356	Nov 13, 2012 by John D
	1998 Eldorado $6950.00 (Preview) One owner, 49,900 miles. New battery, brake rotors and pads this month. We have serviced this vehicle since November of 2002. Very clean, driven very little the last couple of years. Always garage kept. Must see and drive to appreciate. We are selling for our customer/friend. Black in color, dark...	more ambition than brains	1	369	Nov 9, 2012 by more ambition than brains
	Collector Back Exhaust System With H Pipe (Preview) I'm selling the collector back system off the vert to replace with new. The collector to muffler pipes and H pipe are 2 1/2" pipe, and the tailpipes are 2 1/4" with chrome tips. Will fit '68-72 A body for sure. Not sure about other A body years. $50 for the whole works. [IMG]https://i167.ph...	SShink	2	458	Nov 4, 2012 by SShink
	FS Grant steering wheel $15 (Preview) Grant chrome spoke and cap, 13.5 " diameter, black foam. Good condition. I forgot to measure the dish. It's about 2-3 inches.	Lost in the 60s	0	304	Nov 3, 2012 by Lost in the 60s
	FS American Torque Thrust D wheels $200 (Preview) I am selling the front wheels/tires off the '38 They are 15X4.5 with Nexen 165x80x15 tires in very good condition.	Lost in the 60s	6	1029	Nov 3, 2012 by Lost in the 60s
	Looking for a good set of lower control arm brackets of a 10 bolt (Preview) Looking for a pair of brackets off a 10 bolt to replace the brackets on a 66 12 bolt. The holes for the control arm bushings were a little worn, so someone welded 4 thick washers for a repair. I am thinking of repaceing those brackets by have a good pair welded on axel tubes. I saw a good 10 bolt with good b...	jim larson	1	338	Oct 29, 2012 by Lost in the 60s
	HEATED winter storage (Preview) $100/mo or $500/6mo paid in advance Anything longer than 16' will cost extra... (boats, trucks, big cars, etc) Have room for 3, maybe 4 cars. Must have own insurance. Derek Kiefer Mantorville MN (near Rochester) 507-438-8907	Derek69SS	1	400	Oct 23, 2012 by dashboard
	Just pulled today is the 305 Chevy from my 72 Chevelle. Est 275-300 HP. Good CAM/Quadrajet Carb. Complete Engine!! (Preview) http://minneapolis.craigslist.org/dak/pts/3343501422.html	gearlube	1	415	Oct 21, 2012 by 4-door Chevelle
	Black carpet FS and a free steering wheel (Preview) I can bring any of this to Derek's on Saturday. I changed the shifter hump on my '66 this past Spring and have the old carpet and hump for sale. This is the high quality ACC carpet from Auto City Classics. The front has a preformed hump to match the steel hump and is cut out for a floor shifter. There are slit...	Lost in the 60s	3	483	Oct 19, 2012 by Chris R
	FREE Chevelle Stuff (Preview) Everything has to go now so please let me know what you want. I am planning on going to the Anoka Car Show tomorrow. Rail Tranny cooler - new 2 - rear valance panel from my 72, 1 OK 1 not Fan shroud from my 72 Sweep dash from my 72, blue with some holes in it for switches and gauges Dash pad from my 72, single spe...	4-door Chevelle	22	2660	Oct 18, 2012 by dashboard
	Winter Storage at Jamies. (Preview) Jamie got in touch with me today and it looks like he will have plenty of winter storage this season. Right now he says around 7 or 8 vehicles. Depending on if any full sized trucks show up, he says he has a bunch of room available for winter storage this year and asked me to post his email address to get in to...	Chris R	0	322	Oct 17, 2012 by Chris R
	Have a solid good running th350 with converter. Just pulled today (Preview) http://minneapolis.craigslist.org/dak/pts/3343447284.html	gearlube	0	354	Oct 16, 2012 by gearlube
	Free LH 1/4 assembly for 70-72 (Preview) The skin has been cut pretty much from the body line down, but the inner structure is good. Cut off the cat high on the sail, cut mid-rocker, and cut into the trunk opening so you can grab any sections. Free to a good home. I'm not going to it for too long, grab it or it's scrap.	bowtie	10	633	Oct 17, 2012 by bowtie
	Camel hump 461s, Roller rockers, Performer intake (Preview) A pal of mine got these in trade and doesn't need them. They're all fresh, but came off a running engine so they'll get cleaned up before being sold. 500 takes everything.	Scott Parkhurst	5	623	Oct 16, 2012 by Scott Parkhurst
	radiator top plate (Preview) Looking for a 68-72 4 bolt top plate for the radiator, thanks steve	steve m	4	444	Oct 15, 2012 by steve m
	electric garage heaters (Preview) I have 2 heaters I got from Menard's and used in my old house. They're part number CZQTV5M, google it for accurate specs. They work like radiant heat ones--no fan, just projecting the heat wave towards the area. Worked well enough for specific areas like over a work bench or a more focused area (15x15)....	bowtie	1	588	Oct 12, 2012 by bowtie
	Seats Wanted (Preview) I’m looking for a different front seat setup for the Buick, something more comfortable and adjustable for my old butt on long trips. I’d like something like a 60/40 or 50/50 possibly with a fold down armrest, I want the seat to have the built in integral shoulder harness that would work in the vert. I’ve...	dashboard	14	834	Oct 11, 2012 by dashboard
	Need Junk Rims (Preview) Looking for a set of old rusted, bent, twisted ugly 14” rims, (width is not important I only need clearance for factory disc) that will fit a Chevelle/El Camino.	dashboard	5	528	Oct 4, 2012 by dashboard
	WTB: cowl hood trim (Preview) I need the trim on the rear of a cowl hood. Does not need to be perfect, just useable.	bowtie	0	325	Oct 2, 2012 by bowtie
	Chrome trim (Preview) In the process of cleaning out my shed I have run across a very interesting item. One of my previous 4-door Chevelles had chrome trim around the doors and over the pillar inbetween them, that is some serious! Of course I am now giving it away but I thought it was kind of cool!?!	4-door Chevelle	2	391	Oct 2, 2012 by 4-door Chevelle
	FREE: 2 Firestone 225 75-15 tires (Preview) These things are basically new with a white side wall. Let me know if you need a picture. -- Edited by 4-door Chevelle on Sunday 30th of September 2012 07:59:25 AM	4-door Chevelle	2	403	Oct 2, 2012 by 4-door Chevelle
	1969 chevelle hood hinges (Preview) Looking for a nice set of factory hood hinges, no repo, Thanks steve	steve m	1	408	Oct 2, 2012 by Chris R
	WANTED: Headers for my 72 Chevelle (Preview) Drivers side got ruined when caught on a cement apron.	4-door Chevelle	0	317	Sep 30, 2012 by 4-door Chevelle
	WANTED: Pair of BF Goodrich 235 70 15 tires (Preview) This is for the front of my Chevelle.	4-door Chevelle	0	327	Sep 30, 2012 by 4-door Chevelle
	FREE: Nice silver powder coated steel wheels (Preview) I guess these were off an S10. I ran these for a few years and are a nice 15x8 wheel, 5x4 3/4 stud spacing. I am missing two of the beauty rings and I never had any center caps.	4-door Chevelle	0	355	Sep 30, 2012 by 4-door Chevelle
«First < 1 … 13 14 15 16 17 … 26 > Last» \| Page of 26 sorted by