Discussion Forum - Northstar Chevelle Club

Chris R · Chris R

You guys have dissappeared. Whats up with that?

bwild70ss396 · bwild70ss396

I am looking for a business in town that I can get some upper control arm bolts in the next few days. I have checked Friendly Chevy, Napa, Johns, O Rielly, TNT. Any other ideas where to get some. The bolts I am refering to are the splined ones that kinda look like wheel studs that go in the frame to hold upper A...

Lost in the 60s · Lost in the 60s

I noticed I only get a non-dancing banana no matter what smilie I click on and I see other recently get the same result. Any clue what broke, John ?

Tony Hoffer · Tony Hoffer

http://www.sctimes.com/apps/pbcs.dll/article?AID=2011106120032

bowtie · bowtie

Car Craft will be exactly 40 days away. And I'lls till be drunk.

SShink · SShink

Went to check the diff fluid tonight, and the 3/8" square on the plug has been rounded in the corners. Tried a few things, but couldn't get it to budge. Any ideas?

SShink · SShink

I don't know if it was the cool dense air, putting the 3/8" spacer back under the carb, or what, but the Chevelle was running great tonight! I wanted to gas it up for the track this weekend, so I put the 3/8" Edelbrock spacer back in because I couldn't use it before and get the hood closed with th...

SShink · SShink

Saw this '7? Chevelle in a small town by the highway on the drive up north last weekend: [IMG]https://i167.photobucket.c...

Derek69SS · Derek69SS

The whole month of May, we were thinking "Is it EVER going to warm up?" 101deg in Rochester today... Holy crap! I think I'll clean the basement tonight. No reason to punish myself in this heat...

Chris R · Chris R

http://www.classicmoparforum.com/vintage-chicago-indoor-drag-photos/

67ss · 67ss

Well here are some details. It is a 1966 300 deluxe car. I bought it from the son of the original owner, has 150,000 original on it. It was bought new at main motors in anoka. Its a 283 with a 3 on the tree. Motor runs like a watch. Body has a few issues but the fame is good and the interior is perfect. Future plan...

jim larson · jim larson

http://torcoracefuel.net/pro-accelerator.html Looking for something to replace the Octane Supreme 130 by Kemco that has gone out of business. The Supreme 130 really made the car run better on 91 non-oxiginated gas, that is the only thing available around here beside race gas in Red Wing or avi...

Chris R · Chris R

I seem to be locked out of replying or emailing anything in my hotmail account. I can open any email I want just fine. But I cant send any messages or make any new emails here. Been searching on the net for over 2 days now and cant find any real definitive answers. Tried anything I could find on the web on sugg...

69SSConv · 69SSConv

Made it through the parade today without issue, no overheating, car ran great all through the parade. Got a lot of "nice car", "do a burnout", etc. After the parade was out, I went strait to Anoka to pick up my son, who has a 3 day pass, before he ships to Fort McCoy. Picked him up a...

TheWineGuy · TheWineGuy

Hello all, new to the forum, I've been reading for a year and finally decided to join and post. I'm in the middle of a rehab project and could use some help finding a part. I've replaced the steering wheel on my 1970 Chevelle but I'm missing a part. I bought the kit from OPG which had The contacts but when I...

69SSConv · 69SSConv

Question to all those who have done the conversion to a 200r4? As part of the conversion the crossmember gets moved back about 3-4 inches. How did you hook up your parking brake cables after moving the cross member? There is a hook that slips into the cross member with stock transmissions, but with the r...

jim larson · jim larson

Just got in from the garage. Assembly T0512EDH; casting date D 25 6

jim larson · jim larson

Just got through calling a recycler in st. paul. Quote me about 215 a ton for cast iron. Did I hear him right? If so that works out to around $1 a lb. Maybe I will have to call that guy back with the chevelle that is pretty much ready for the chruser.

jim larson · jim larson

Well as far as I could determine this looked like a pretty good block; but who know. No visiable bolt hole problems, repairs, etc. Deck look good, no indication of water corrosion due to a bad head basket. Appears to be standard with a ridge on the top of the cylinders. Appeas to have original caps with...

SShink · SShink

Man this forum is DEAD today!!! Must be because the CAC clock expired and everyone's depressed about not being out of the CAC club???

SShink · SShink

Enter MDAY1 through midnight Monday for a 20% discount (except on discounted items). www.yearone.com Although, they had storms in Georgia last night and their system is currently down... so try later.

SShink · SShink

Check out the new countdown counter to Car Craft! Get those wrenches movin'!

bowtie · bowtie

I think it was asked a while back, but who here has served in the military, or has close family that is currently serving? I'll start. I have not, though I seriously considered it when graduating in 1991. My father had applied to the US Military Academy at West Point in 1963. He was told that the quota was...

John D · John D

Wanna own the Mach 5?? Just get Trixie, JimJim, Pops and go to town.

Chris R · Chris R

http://www.msnbc.msn.com/id/21134540/vp/43139901#43139901-- Edited by Chris R on Monday 23rd of May 2011 02:28:44 PM -- Edited by Chris R o...

John D · John D

Radar track shows you were in the clobber zone.

John D · John D

First and foremost I'd like to thank member Darren A. About 2 weeks ago he dropped off his "stash" of old newsletters - some in print, some on CD - for me to work on completing the archives. With his resources, I was able to fill in: All of 2004 All of 2005 2 of None in 2007 All of 2008 Take a look here - There's a l...

John D · John D

I've got about 35 little naggy projects around here, and I'm stuck as to which one(s) to attack first. Most of them involve being outside Probably will: Clean garage workbench (there is a bench under there, I know it, I've seen it before) Clean basement workshop (will need a roll-off) Talk to the Gener...

SShink · SShink

Took the Chevelle out for a cruize tonight, and man it's running good! Figured I better get it out since the weekend weather isn't looking good. Also confirmed there is a posi in the rear by laying 2 nice black stripes on the blacktop for as long as I wanted to on some country blacktop! Of course, I had...

Chris R · Chris R

http://msn.foxsports.com/mlb/story/Minnesota-Twins-Harmon-Killebrew-dies-at-74-051711?GT1=39002

Topic		Started By	Replies	Views	Last Post
	Ian, Lori and Paul Silicano. (Preview) You guys have dissappeared. Whats up with that?	Chris R	1	436	Jun 13, 2011 by bowtie
	Where do I get upper control arm bolts???? (Preview) I am looking for a business in town that I can get some upper control arm bolts in the next few days. I have checked Friendly Chevy, Napa, Johns, O Rielly, TNT. Any other ideas where to get some. The bolts I am refering to are the splined ones that kinda look like wheel studs that go in the frame to hold upper A...	bwild70ss396	20	2908	Jun 13, 2011 by more ambition than brains
	Our smilies are broken (Preview) I noticed I only get a non-dancing banana no matter what smilie I click on and I see other recently get the same result. Any clue what broke, John ?	Lost in the 60s	17	897	Jun 12, 2011 by John D
	MY vintage snowmobile passion got some ink in the St.Cloud times. (Preview) http://www.sctimes.com/apps/pbcs.dll/article?AID=2011106120032	Tony Hoffer	1	401	Jun 12, 2011 by Dave Seitz
	If I stay up 45 more minutes.... (Preview) Car Craft will be exactly 40 days away. And I'lls till be drunk.	bowtie	0	337	Jun 12, 2011 by bowtie
	Stuck Diff Plug-Suggestions? (Preview) Went to check the diff fluid tonight, and the 3/8" square on the plug has been rounded in the corners. Tried a few things, but couldn't get it to budge. Any ideas?	SShink	7	592	Jun 10, 2011 by OscarZ
	Cool air? Carb spacer? Man the Chevelle ran great tonight! (Preview) I don't know if it was the cool dense air, putting the 3/8" spacer back under the carb, or what, but the Chevelle was running great tonight! I wanted to gas it up for the track this weekend, so I put the 3/8" Edelbrock spacer back in because I couldn't use it before and get the hood closed with th...	SShink	6	596	Jun 10, 2011 by Dave Seitz
	Drive by find (Preview) Saw this '7? Chevelle in a small town by the highway on the drive up north last weekend: [IMG]https://i167.photobucket.c...	SShink	5	417	Jun 8, 2011 by Tony Hoffer
	I guess we know the answer to that question... (Preview) The whole month of May, we were thinking "Is it EVER going to warm up?" 101deg in Rochester today... Holy crap! I think I'll clean the basement tonight. No reason to punish myself in this heat...	Derek69SS	8	668	Jun 8, 2011 by OscarZ
	1960s Vintage indoor drag racing photos. (Preview) http://www.classicmoparforum.com/vintage-chicago-indoor-drag-photos/	Chris R	2	591	Jun 6, 2011 by dashboard
	I bought a chevelle!!! (Preview) Well here are some details. It is a 1966 300 deluxe car. I bought it from the son of the original owner, has 150,000 original on it. It was bought new at main motors in anoka. Its a 283 with a 3 on the tree. Motor runs like a watch. Body has a few issues but the fame is good and the interior is perfect. Future plan...	67ss	37	1001	Jun 6, 2011 by Chris R
	Torco Octane Accelerant, has anyone tried this? (Preview) http://torcoracefuel.net/pro-accelerator.html Looking for something to replace the Octane Supreme 130 by Kemco that has gone out of business. The Supreme 130 really made the car run better on 91 non-oxiginated gas, that is the only thing available around here beside race gas in Red Wing or avi...	jim larson	3	1119	Jun 5, 2011 by SShink
	Anyone good with Hotmail? (Preview) I seem to be locked out of replying or emailing anything in my hotmail account. I can open any email I want just fine. But I cant send any messages or make any new emails here. Been searching on the net for over 2 days now and cant find any real definitive answers. Tried anything I could find on the web on sugg...	Chris R	0	283	Jun 5, 2011 by Chris R
	Had my first, mechanical issue leaving me stranded for a while? (Preview) Made it through the parade today without issue, no overheating, car ran great all through the parade. Got a lot of "nice car", "do a burnout", etc. After the parade was out, I went strait to Anoka to pick up my son, who has a 3 day pass, before he ships to Fort McCoy. Picked him up a...	69SSConv	5	386	May 30, 2011 by seagrams72
	I could use some help finding a very small parl (Preview) Hello all, new to the forum, I've been reading for a year and finally decided to join and post. I'm in the middle of a rehab project and could use some help finding a part. I've replaced the steering wheel on my 1970 Chevelle but I'm missing a part. I bought the kit from OPG which had The contacts but when I...	TheWineGuy	9	861	May 30, 2011 by Lost in the 60s
	Fellow 200-4R converts, parking cable question? (Preview) Question to all those who have done the conversion to a 200r4? As part of the conversion the crossmember gets moved back about 3-4 inches. How did you hook up your parking brake cables after moving the cross member? There is a hook that slips into the cross member with stock transmissions, but with the r...	69SSConv	2	377	May 29, 2011 by Pushrod
	Mitch, I made a mistake on dates (Preview) Just got in from the garage. Assembly T0512EDH; casting date D 25 6	jim larson	8	683	May 29, 2011 by Chris R
	Current Prices for Cast Iron & Steel (Preview) Just got through calling a recycler in st. paul. Quote me about 215 a ton for cast iron. Did I hear him right? If so that works out to around $1 a lb. Maybe I will have to call that guy back with the chevelle that is pretty much ready for the chruser.	jim larson	7	1937	May 27, 2011 by John D
	Brought home a Nov of 65 block today, How do I clean this thing? (Preview) Well as far as I could determine this looked like a pretty good block; but who know. No visiable bolt hole problems, repairs, etc. Deck look good, no indication of water corrosion due to a bad head basket. Appears to be standard with a ridge on the top of the cylinders. Appeas to have original caps with...	jim larson	5	576	May 27, 2011 by jim larson
	CAC Clock Expired-Got everyone's tongue? (Preview) Man this forum is DEAD today!!! Must be because the CAC clock expired and everyone's depressed about not being out of the CAC club???	SShink	11	518	May 27, 2011 by 69SSConv
	Year One 20% Memorial Day Discount (Preview) Enter MDAY1 through midnight Monday for a 20% discount (except on discounted items). www.yearone.com Although, they had storms in Georgia last night and their system is currently down... so try later.	SShink	0	301	May 27, 2011 by SShink
	NEW COUNTER! COUNTDOWN TO CAR CRAFT (Preview) Check out the new countdown counter to Car Craft! Get those wrenches movin'!	SShink	2	324	May 27, 2011 by John D
	Military service (Preview) I think it was asked a while back, but who here has served in the military, or has close family that is currently serving? I'll start. I have not, though I seriously considered it when graduating in 1991. My father had applied to the US Military Academy at West Point in 1963. He was told that the quota was...	bowtie	9	823	May 25, 2011 by jim larson
	Cartoon Classic (Preview) Wanna own the Mach 5?? Just get Trixie, JimJim, Pops and go to town.	John D	0	316	May 24, 2011 by John D
	Live tornado footage from Joplin, Missouri. (Preview) http://www.msnbc.msn.com/id/21134540/vp/43139901#43139901-- Edited by Chris R on Monday 23rd of May 2011 02:28:44 PM -- Edited by Chris R o...	Chris R	1	397	May 24, 2011 by Dave Seitz
	Bryan, Ron, Brad, Larry... You guys still there?? (Preview) Radar track shows you were in the clobber zone.	John D	15	836	May 24, 2011 by Dave Seitz
	WEBSITE UPDATES - Newsletter Section (Preview) First and foremost I'd like to thank member Darren A. About 2 weeks ago he dropped off his "stash" of old newsletters - some in print, some on CD - for me to work on completing the archives. With his resources, I was able to fill in: All of 2004 All of 2005 2 of None in 2007 All of 2008 Take a look here - There's a l...	John D	2	425	May 21, 2011 by bowtie
	Rain Out... What to do?? (Preview) I've got about 35 little naggy projects around here, and I'm stuck as to which one(s) to attack first. Most of them involve being outside Probably will: Clean garage workbench (there is a bench under there, I know it, I've seen it before) Clean basement workshop (will need a roll-off) Talk to the Gener...	John D	14	804	May 21, 2011 by Lost in the 60s
	It was a great night for a cruize-And some blacktop fun! (Preview) Took the Chevelle out for a cruize tonight, and man it's running good! Figured I better get it out since the weekend weather isn't looking good. Also confirmed there is a posi in the rear by laying 2 nice black stripes on the blacktop for as long as I wanted to on some country blacktop! Of course, I had...	SShink	9	516	May 21, 2011 by Bowtieman427
	Harmon Killebrew - RIP (Preview) http://msn.foxsports.com/mlb/story/Minnesota-Twins-Harmon-Killebrew-dies-at-74-051711?GT1=39002	Chris R	1	385	May 20, 2011 by OscarZ
«First < 1 … 56 57 58 59 60 … 67 > Last» \| Page of 67 sorted by